|
| . |
|
Novosti:
svetilke/ lampe / dive lights --> Ikelite podvodne luči
Ikelite Gamma tactical underwatter light
Akcijska cena: 110 EUR
(26.360 ST)
Proizvajalec: Ikelite
Koda: I 1803
Specifications
•400 ft (120m) depth rating
•220 lumen concentrated 10° beam
•Color temperature 6500K
•Over 10 hours run time
•Accepts 2 CR123 batteries
•Dimensions 5.6 x 1.4 in (142 x 36 mm)
•Weighs only 4 oz (113 gram )
Each Gamma starts with aircraft grade aluminum, precision-machined into a supremely ergonomic, no-slip contour grip. We purposefully avoided unnecessary grooves and texturing on the light body to allow it to slide in and out of your pocket without snagging. Military-grade anodizing and a double o-ring seal provide corrosion-proof and waterproof operation up to 400ft (120m). A heavy duty mechanical tail switch provides either continuous or momentary lighting at the touch of a button.
Like every Ikelite product, Gamma is built by hand in the USA and individually tested for function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
|
ohišja digital / kućišta / housings --> Sea&Sea - digital Canon
MDX-6D for Canon EOS 6 D
Cena: 2.900 EUR
(694.956 ST)
Proizvajalec: Sea & Sea, Japan
Koda: S06144
Suitable for taking both still images and movie
Uses a lightweight and durable aluminum body that can withstand even the most severe shooting environments.
The aluminum material used in MDX series housings makes it possible to manufacture a body that is both lightweight and strong. The all-new high-rigidity, high-durability, and precision MDX series demonstrates the highest levels of performance under a variety of shooting conditions.
Controls almost all of the Canon EOS 7D essential functions underwater.
Every detail of the housing is precision machined from a solid aluminum block to achieve a high-quality texture and design. All edges have been polished carefully for safety.
The housing is protected by a highly corrosion resistant, anodized coating. The coating protects the housing from environmental corrosion and abrasions.
The shutter lever can be operated in two ways – pressing from the top or pulling from the front for quick snap shorts – and offers a smooth halfway press for quickly locking the autofocus.
TTL auto adjustment available when using an optional YS Converter/C. When using a YS Converter/C to enable the TTL auto adjustment, use a 5-pin Sync Cord/N to connect it to a genuine SEA&SEA strobe.
Furnished with a tripod socket in the central region of the bottom surface of the main body. If you remove the attached Ergo Grip, you can also add an optional Grip-Stay L.
Comes standard with two bulkhead connectors: one type-N connector (2-pin wired for manual) and one 6-pin wired connector (for dedicated TTL).
Equipped with a Optical Viewfinder 0.5x standard. Interchangeable 0.66x/0.8x viewfinders (optional) are also available.
The quick shoe makes the camera easy to install and remove from the housing. The camera is firmly and correctly mounted on the quick shoe with the tripod screw hole and the positioning pin.
A built-in leak sensor immediately alerts you to any water leakage.
Strong and durable build, with a depth rating of up to 60m / 200ft.
*The MDX-7D housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 6-pin wired connector. *To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the 5-pin Dual Sync Cord/N.
Specifications
[ MDX-7D Housing ] [Construction] Body: corrosion-resistant aluminum alloy (machined)
Grip: corrosion-resistant die-cast aluminum alloy
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 341x194x141mm / 13.6x7.8x5.6inch
[Weight] Approx. 2,700g / 94.5oz (Housing
Two Fiber-optic cable sockets
Simply by connecting the Fiber-Optic Cable (L-type) to the connector, the light of the digital camera’s built-in flash is detected and connected to an external strobe. This is considerably less complicated than setting up an electrical connector that requires detailed knowledge. It also eliminates any risks involved when the connector is submerged in water.
Unparalleled design provides easy access to the main dial and the quick control dial. Shutter speed and aperture can be adjusted without removing your hand from the grip. Button to activate live view photography and video is ergonomically positioned for easy access. While holding the grip, you can control AE lock/Index/Reduce lever and AF point selection/Magnify lever and AF start lever to check focus points and then press the start/stop button to record video. The setting button is also situated close to the grip for quick access to the button. Great functionality, engineering and ergonomic design make this housing exceptional.
only)
|
svetilke/ lampe / dive lights --> Ikelite podvodne luči
Ikelite PCm u/w light
Akcijska cena: 50 EUR
(11.982 ST)
Proizvajalec: Ikelite
Koda: I 1765
Specifications
•300 ft (90 m) depth rating
•205 lumen concentrated spot beam
•Over 5 hours burn time
•Accepts 4 AA NiMH or Alkaline batteries
•Dimensions 2 x 4 in (50 x 101 mm )
The ultimate choice for use above and below water. Ikelite Stay-Brite LED technology outshines budget LED lights hour after hour.
Special optics concentrate the super powerful white LEDs into a penetrating spot beam.
Rubber and ABS construction provides durability and 100% corrosion-free performance. The lifespan of LED bulbs is 50 to 100 times that of standard incandescent lamps, making replacement bulbs virtually obsolete.
|
fleši / blicevi / strobe sets --> Fleš Sea digital
Strobe YS-D1 EV TTL
Akcijska cena: 600 EUR
(143.784 ST)
Proizvajalec: Sea & Sea, Japan
Koda: S03114
YS-D1
YS-D1 Black
Product No.03114
Accessories
Fixing bolt, Diffuser 100, Diffuser 120, Ball Mount Strobe Adaptor
*When the YS-D1 is used with a camera with built-in flash in housing, use the Fiber-Optic Cable (L-type).
*When the YS-D1 strobe is used with a waterproof case (for compact digital camera), optional accessory such as the Strobe Mask Set will be required together with Fiber-Optic Cable (L-type).
The YS-D1 sets a new standard for underwater strobes. From subtle light output as low as guide number 1 to a maximum power of guide number 32, control of underwater lighting has become effortless with the YS-D1.
The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function
Equipped with SEA&SEA’s new slave TTL system called “DS-TTL ll”
Revising the algorithms used for the DS-TTL system, the YS-D1 employs a totally new slave TTL system.
The strobe can adjust the interval between the pre flash and the primary flash in order to be compatible with a wide-variety of cameras, if not all, on the market today.
The strobe is equipped with DS-TTL ll mode which is more responsive, more precise and more reliable.
The DS-TTL ll enables a variety of strobe sync photography such as slave TTL and slave manual (11 steps) with compact or digital SLR cameras.
When used with a digital SLR camera in housing, the strobe can also be connected with a conventional sync cord and through a YS Converter for TTL strobe photography.
In a clear water environment, two YS-D1 strobes in DS-TTL ll mode provide perfect lighting.
When you would like to emphasize contrast, setting the main strobe in DS-TTL II mode and the secondary strobe in manual mode (11 steps) offers flexibility without limiting control.
When underwater visibility is poor, two YS-D1’s set to manual mode may produce the best images.
The YS-D1 is the most versatile underwater strobe available today. The DS-TTL exposure compensation function enables subtle lighting control by adjusting the Light Level dial in DS-TTL mode.
Powered by only four AA batteries, the YS-D1 offers a maximum light output of Guide Number 32
Compared to the YS-110Alpha, the YS-D1 is 1EV more powerful, 50g (1.8oz) lighter and 10% smaller. Not only is the YS-D1 suitable for macro photography, but also is robust enough for wide-angle photography. it is also ideal for macro photography which requires delicate light level control. The strobe’s guide number can be reduced to 1. Highly versatile, the YS-D1 offers more automatic and manual control over lighting to get that perfect exposure.
The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function
By controlling the actual flash light level, the strobe realizes accurate exposure compensation with EV value.
Regardless of a compact or a SLR camera, you can achieve any desired exposure compensation. However, many TTL systems are not reliable.
The YS-D1’s DS-TTL exposure compensation function allows users to adjust the light level in TTL mode (-1.5EV, -1EV, -0.7EV, -0.3EV, +0.3EV, +0.7EV, +1EV, +1.5EV).
A high-visibility three-colored LED indicator lamp is easy to read even during shooting
Ready lamp
A red LED will be shown when the strobe has been charged and is ready to fire.
TTL confirmation lamp
A green LED will be shown for two seconds to confirm DS-TTLll exposure.
Slave TTL mode lamp
A blue LED will be shown when the strobe is set to Slave TTL mode and the strobe has been charged and is ready to fire
YS-D1 Specifications
[Guide Number (ISO 100/m) (land)] : 32, 24 (with Diffuser 100 attached), 20 (with Diffuser 120 attached)
[Beam Angle] : 80°x80° (without diffuser), 100°x100°(diffuser 100), 120° x 120° (diffuser 120)
[Batteries] : 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes*1] : A: 150 Ni-MH: 250
[Recycle time (full)*2] : A: 2.8 sec. Ni-MH: 1.9 sec.
[Color temperature] : 5600K
[Color temperature w/diffuser] : 5250K
[Depth rating] : 100m / 330ft
[Dimensions (WxHxD)] （Excluding protruding part(s) and the arm holder.）: 87x135x111mm / 3.5 x 5.4 x 4.4 inches
[Weight] : 650g / 22.9oz (w/o batteries) * Attached a YS Mount
Strobe Adaptor and a fixing bolt to the Strobe.
[Underwater weight] : 0.5g / 0.02oz(w/ batteries)
[Others]
Exposure control: DS-TTL II, Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 32 (11 steps)
Pre-flash control: Equipped with pre-flash cancel mode
DS-TTL II function
Slave function
Auto power OFF function
Sync options: Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable (L-type)
Over-pressure relief valve
LED target light
*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteries.
Please do take a look at the teaser for that superb strobe:
http://www.youtube.com/watch?v=sT4DBfIR2ns
|
fleši / blicevi / strobe sets --> Fleš Sea digital
Strobe YS-D1 EV TTL + SeaArm VII compact set
Akcijska cena: 790 EUR
(189.316 ST)
Proizvajalec: Sea & Sea, Japan
Koda: S03114
A small YS-D1 DS-TTL II and manual strobe with built-in target light.
Universal Underwater lighting system for all Point and Shoot Digital cameras. Depth rating 100 Meters.
From compact digital cameras to digital SLR cameras.
Includes
YS-D1 DS TTL strobe
Diffuser 100, Diffuser 120, Ball Mount Strobe Adaptor
Sea Arm VII Compact
Fiber Optic cable
Mask Set
The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function.
Equipped with SEA&SEA’s new slave TTL system called “DS-TTL ll”
The YS-D1 sets a new standard for underwater strobes. From subtle light output as low as guide number 1 to a maximum power of guide number 32, control of underwater lighting has become effortless with the YS-D1.
YS-D1 Black Specifications
Product No.03114
Accessories
Fixing bolt, Diffuser 100, Diffuser 120, Ball Mount Strobe Adaptor
*When the YS-D1 is used with a camera with built-in flash in housing, use the Fiber-Optic Cable (L-type).
*When the YS-D1 strobe is used with a waterproof case (for compact digital camera), optional accessory such as the Strobe Mask Set will be required together with Fiber-Optic Cable (L-type).
Equipped with SEA&SEA’s new slave TTL system called “DS-TTL ll”
Revising the algorithms used for the DS-TTL system, the YS-D1 employs a totally new slave TTL system.
The strobe can adjust the interval between the pre flash and the primary flash in order to be compatible with a wide-variety of cameras, if not all, on the market today.
The strobe is equipped with DS-TTL ll mode which is more responsive, more precise and more reliable.
The DS-TTL ll enables a variety of strobe sync photography such as slave TTL and slave manual (11 steps) with compact or digital SLR cameras.
When used with a digital SLR camera in housing, the strobe can also be connected with a conventional sync cord and through a YS Converter for TTL strobe photography.
In a clear water environment, two YS-D1 strobes in DS-TTL ll mode provide perfect lighting.
When you would like to emphasize contrast, setting the main strobe in DS-TTL II mode and the secondary strobe in manual mode (11 steps) offers flexibility without limiting control.
When underwater visibility is poor, two YS-D1’s set to manual mode may produce the best images.
The YS-D1 is the most versatile underwater strobe available today. The DS-TTL exposure compensation function enables subtle lighting control by adjusting the Light Level dial in DS-TTL mode.
Powered by only four AA batteries, the YS-D1 offers a maximum light output of Guide Number 32
Compared to the YS-110Alpha, the YS-D1 is 1EV more powerful, 50g (1.8oz) lighter and 10% smaller. Not only is the YS-D1 suitable for macro photography, but also is robust enough for wide-angle photography. it is also ideal for macro photography which requires delicate light level control. The strobe’s guide number can be reduced to 1. Highly versatile, the YS-D1 offers more automatic and manual control over lighting to get that perfect exposure.
The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function
By controlling the actual flash light level, the strobe realizes accurate exposure compensation with EV value.
Regardless of a compact or a SLR camera, you can achieve any desired exposure compensation. However, many TTL systems are not reliable.
The YS-D1’s DS-TTL exposure compensation function allows users to adjust the light level in TTL mode (-1.5EV, -1EV, -0.7EV, -0.3EV, +0.3EV, +0.7EV, +1EV, +1.5EV).
A high-visibility three-colored LED indicator lamp is easy to read even during shooting
Ready lamp
A red LED will be shown when the strobe has been charged and is ready to fire.
TTL confirmation lamp
A green LED will be shown for two seconds to confirm DS-TTLll exposure.
Slave TTL mode lamp
A blue LED will be shown when the strobe is set to Slave TTL mode and the strobe has been charged and is ready to fire
YS-D1 Specifications
[Guide Number (ISO 100/m) (land)] : 32, 24 (with Diffuser 100 attached), 20 (with Diffuser 120 attached)
[Beam Angle] : 80°x80° (without diffuser), 100°x100°(diffuser 100), 120° x 120° (diffuser 120)
[Batteries] : 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes*1] : A: 150 Ni-MH: 250
[Recycle time (full)*2] : A: 2.8 sec. Ni-MH: 1.9 sec.
[Color temperature] : 5600K
[Color temperature w/diffuser] : 5250K
[Depth rating] : 100m / 330ft
[Dimensions (WxHxD)] （Excluding protruding part(s) and the arm holder.）: 87x135x111mm / 3.5 x 5.4 x 4.4 inches
[Weight] : 650g / 22.9oz (w/o batteries) * Attached a YS Mount
Strobe Adaptor and a fixing bolt to the Strobe.
[Underwater weight] : 0.5g / 0.02oz(w/ batteries)
[Others]
Exposure control: DS-TTL II, Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 32 (11 steps)
Pre-flash control: Equipped with pre-flash cancel mode
DS-TTL II function
Slave function
Auto power OFF function
Sync options: Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable (L-type)
Over-pressure relief valve
LED target light
*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteries.
Please do take a look at the teaser for that superb strobe:
http://www.youtube.com/watch?v=sT4DBfIR2ns
|
|
|
FIJI Team
Slovenija / SLO
FI POTENCIAL d.o.o.
Komenskega 1
4000 Kranj, Slovenija
tel: +386 4 5329 664
GSM: +386 31 302 367
info@fiji.si
|
FIJI Team
Hrvatska / CRO
Villa Splendissima d.o.o.
Lakmartinska 4
51 500 Krk, Hrvatska
TEL: 099 / 224 8090
info@fiji.si
|
|
| . |
|
