|
| . |
|
fleši / blicevi / strobe sets --> Fleš Sea digital
Strobe YS-D1 EV TTL
Akcijska cena: 600 EUR
(143.784 SIT)
Proizvajalec: Sea & Sea, Japan
Koda: S03114
YS-D1
YS-D1 Black
Product No.03114
Accessories
Fixing bolt, Diffuser 100, Diffuser 120, Ball Mount Strobe Adaptor
*When the YS-D1 is used with a camera with built-in flash in housing, use the Fiber-Optic Cable (L-type).
*When the YS-D1 strobe is used with a waterproof case (for compact digital camera), optional accessory such as the Strobe Mask Set will be required together with Fiber-Optic Cable (L-type).
The YS-D1 sets a new standard for underwater strobes. From subtle light output as low as guide number 1 to a maximum power of guide number 32, control of underwater lighting has become effortless with the YS-D1.
The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function
Equipped with SEA&SEA’s new slave TTL system called “DS-TTL ll”
Revising the algorithms used for the DS-TTL system, the YS-D1 employs a totally new slave TTL system.
The strobe can adjust the interval between the pre flash and the primary flash in order to be compatible with a wide-variety of cameras, if not all, on the market today.
The strobe is equipped with DS-TTL ll mode which is more responsive, more precise and more reliable.
The DS-TTL ll enables a variety of strobe sync photography such as slave TTL and slave manual (11 steps) with compact or digital SLR cameras.
When used with a digital SLR camera in housing, the strobe can also be connected with a conventional sync cord and through a YS Converter for TTL strobe photography.
In a clear water environment, two YS-D1 strobes in DS-TTL ll mode provide perfect lighting.
When you would like to emphasize contrast, setting the main strobe in DS-TTL II mode and the secondary strobe in manual mode (11 steps) offers flexibility without limiting control.
When underwater visibility is poor, two YS-D1’s set to manual mode may produce the best images.
The YS-D1 is the most versatile underwater strobe available today. The DS-TTL exposure compensation function enables subtle lighting control by adjusting the Light Level dial in DS-TTL mode.
Powered by only four AA batteries, the YS-D1 offers a maximum light output of Guide Number 32
Compared to the YS-110Alpha, the YS-D1 is 1EV more powerful, 50g (1.8oz) lighter and 10% smaller. Not only is the YS-D1 suitable for macro photography, but also is robust enough for wide-angle photography. it is also ideal for macro photography which requires delicate light level control. The strobe’s guide number can be reduced to 1. Highly versatile, the YS-D1 offers more automatic and manual control over lighting to get that perfect exposure.
The YS-D1 is the world’s first slave TTL strobe equipped with an exposure compensation (EV) control function
By controlling the actual flash light level, the strobe realizes accurate exposure compensation with EV value.
Regardless of a compact or a SLR camera, you can achieve any desired exposure compensation. However, many TTL systems are not reliable.
The YS-D1’s DS-TTL exposure compensation function allows users to adjust the light level in TTL mode (-1.5EV, -1EV, -0.7EV, -0.3EV, +0.3EV, +0.7EV, +1EV, +1.5EV).
A high-visibility three-colored LED indicator lamp is easy to read even during shooting
Ready lamp
A red LED will be shown when the strobe has been charged and is ready to fire.
TTL confirmation lamp
A green LED will be shown for two seconds to confirm DS-TTLll exposure.
Slave TTL mode lamp
A blue LED will be shown when the strobe is set to Slave TTL mode and the strobe has been charged and is ready to fire
YS-D1 Specifications
[Guide Number (ISO 100/m) (land)] : 32, 24 (with Diffuser 100 attached), 20 (with Diffuser 120 attached)
[Beam Angle] : 80°x80° (without diffuser), 100°x100°(diffuser 100), 120° x 120° (diffuser 120)
[Batteries] : 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes*1] : A: 150 Ni-MH: 250
[Recycle time (full)*2] : A: 2.8 sec. Ni-MH: 1.9 sec.
[Color temperature] : 5600K
[Color temperature w/diffuser] : 5250K
[Depth rating] : 100m / 330ft
[Dimensions (WxHxD)] （Excluding protruding part(s) and the arm holder.）: 87x135x111mm / 3.5 x 5.4 x 4.4 inches
[Weight] : 650g / 22.9oz (w/o batteries) * Attached a YS Mount
Strobe Adaptor and a fixing bolt to the Strobe.
[Underwater weight] : 0.5g / 0.02oz(w/ batteries)
[Others]
Exposure control: DS-TTL II, Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 32 (11 steps)
Pre-flash control: Equipped with pre-flash cancel mode
DS-TTL II function
Slave function
Auto power OFF function
Sync options: Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable (L-type)
Over-pressure relief valve
LED target light
*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteries.
Please do take a look at the teaser for that superb strobe:
http://www.youtube.com/watch?v=sT4DBfIR2ns
|
|
|
FIJI Team
Slovenija / SLO
FI POTENCIAL d.o.o.
Komenskega 1
4000 Kranj, Slovenija
tel: +386 4 5329 664
GSM: +386 31 302 367
info@fiji.si
|
FIJI Team
Hrvatska / CRO
Villa Splendissima d.o.o.
Lakmartinska 4
51 500 Krk, Hrvatska
TEL: 099 / 224 8090
info@fiji.si
|
|
| . |
|
